visit our website at: www.panduit.com/ncg network connectivity group spec sheet specifications technical information applications sc fiber optic connectors shall be compliant with tia focis-3. sc connectors shall contain a factory terminated pre-polished multimode fiber connector, requiring no field polishing and no adhesive. the fibers shall terminate in 2.5mm ferrules and have typical insertion loss of 0.35db per connector. o pti -c rimp ? sc fiber optic connector ? the o pti -c rimp sc fiber optic connector improves an industry standard design. the factory polishing and crimp termination speeds installation and reduces the installation cost for the connector. sc fiber optic connectors are widely used in fiber optic backbone and horizontal applications for high-speed data transmissions. the pre- polished ferrule insures reliability in essential data networks by reducing the possibility of installer error. key features and ...benefits pre-polished fiber stub eliminates polishing steps, speeding installation mechanical crimp consistently provides higher than industry standard cable cable retention retention; requires no adhesive, speeding installation proven 2.5mm uses standard termination tools and procedures and provides ceramic ferrules strength and reliability robust design protects fibers from mechanical and environmental stress non-optical disconnect network reliability; maintains data transmission under tensile loads (jacketed cable only) focis-3 compliant ensures intermatability with all focis-3 compliant components exceeds tia/eia-568-b.3 network reliability assured as defined by tia color-coded inner immediate visual recognition or identification of inner housing; housing 62.5/125m (gray) and 50/125m (orange) fiber compatibility: 62.5/125m and 50/125m multimode fiber cable type: tight-buffered cable only (3.0mm jacketed or 900m) ferrule type: zirconia ceramic with a pre-polished fiber stub insertion loss: 0.3db typical (62.5/125m), 0.4db typical (50/125m) return loss: greater than 25db pre-polished multimode 900m tight-buffered fiber or 3mm jacketed cable 62.5/125m black boot: fscmmbl 62.5/125m red boot: fscmmrd 50/125m black boot: fscmm50bl 50/125m red boot: fscmm50rd multimode patch cords and pigtails o pti -p lug ? duplex connector to sc: f6d6p-3m? simplex 900m buffered sc pigtails: f6b3-nm? simplex sc to sc: f6s3-3m? duplex sc to sc: f6d3-3m? duplex st to sc: f6d2-3m? duplex sc to fc: f6d3-4m? pre-polished crimp termination tooling termination kit: fjmkit please contact factory for additional patch cord configurations and custom lengths. ?available in standard lengths of 1, 2, 3 and 10 meters reduces installation time over standard sc field polish/adhesive connectors by 50%. installer tip
o pti -c rimp ? sc fiber optic connector our products are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to the replacement of any product proved to be defective within 6 months (for product) or 90 days (for tools) from the date of delivery. tool warranty is void if panduit tools are modified, altered or misused in any way. use of panduit tooling with any product other than the specified panduit products for which the tool was designed, constitutes misuse. before using, user shall determine the suitability of the product for his intended use and user assumes all risk and liability whatsoever in connection therewith. this warranty is made in lieu of and excludes all other warranties, expressed or implied. the implied warranties of merchantability and fitness for a particular use are specifically excluded. neither seller nor manufacturer shall be liable for any other injury, loss or damage whether direct or consequential, arising out of the use of, or the inability to use, the product. the information contained in this literature is based on our experience to date and is believed to be reliable. it is intended as a guide for use by persons having technical skill at their own discretion and risk. we do not guarantee favorable results or assume any liability in connection with its use. dimensions contained herein are for reference purposes only. for specific dimensional requirements consult the factory. this publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. this supersedes and voids all previous literature, etc. network connectivity group world headquarters panduit corp. tinley park, illinois, usa customer service: 800-777-3300 technical support: 866-405-6654 fax: 708-444-6993 email: ncginfo@panduit.com internet: www.panduit.com/ncg worldwide subsidiaries and sales offices for pricing and further information ? contact your local authorized panduit p an -n et ? distributor or sales office ? panduit corp. 2002 all rights reserved sa-ncsp1037a printed in u.s.a. dimensions are in inches (dimensions in brackets are in millimeters) 900m boot ? standards compliant connector performance tia 455 description test procedure and tia/eia-568-b.3 required performance performance 1 flex 100 cycles; -180 to 180 degrees; max. insertion loss 0.75db, min. return loss 20db < 0.1db additional loss 2 impact 8 drops from 1.8m; max. insertion loss 0.75db, min. return loss 20db < 0.1db additional loss 4 high temperature 4 days at 60c followed by post-conditioning fotp-6; max. insertion loss 0.75db, min. return loss 20db < 0.1db additional loss 21 durability 500 mate/unmate cycles; max. insertion loss 0.75db, min. return loss 20db < 0.1db additional loss 36 twist 10 cycles; 2.5 cw, 5 ccw, 2.5 cw; max. insertion loss 0.75db, min. return loss 20db < 0.1db additional loss 185 coupling strength 7.4 lbs. at 0 degrees; max. insertion loss 0.75db, min. return loss 20db < 0.1db additional loss 188 low temperature 4 days at 0c; max. insertion loss 0.75db, min. return loss 20db, max. change during test 0.3db < 0.1db additional loss 34 insertion loss max. insertion loss 0.75db, min. return loss 20db 0.3db typical (62.5/125m), 0.4db typical (50/125m) 107 return loss 20db minimum >25db 5 humidity 4 days at 90-95% rh and 40c; max. insertion loss 0.75db, min. return loss 20db, max. change during test 0.4db < 0.1db additional loss 6 cable retention 11.24 lbs. at 0 degrees, 4.4 lbs. at 90 degrees; max. insertion loss 0.75db, min. return loss 20db, max. additional loss 0.5db < 0.1db additional loss note: multimode tests performed at 850 and 1300nm. 3mm boot 2.04 [51.9] 2.32 [59.0] panduit canada markham, ontario phone: 800-777-3300 panduit europe ltd. london, uk phone: 44 208-601-7200 panduit japan tokyo, japan phone (81) (3) 3767-7011 panduit singapore pte. ltd. republic of singapore phone: (65) 379 6700 panduit australia pty. ltd. victoria, australia phone: (61) 3-9794 9020 panduit latin america jalisco, mexico phone: (52) 3 666-2501
|
